We offer Halal and Kosher Ferric Chloride Hexahydrate & Anhydrous made in an ISO9001, ISO22000 (FSSC22000) and cGMP certified facility, Anmol Chemicals a mubygroup company involved in manufacturer of Speciality Chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals. The group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa USA & china.
The units in the group have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal and DMF support is available.

Home ---------- Contact

CarboyBarrelsBags PalletBig BagFerric Chloride HexahydrateFerric Chloride Anhydrous

Ferric Chloride Anhydrous SDS GHS MSDS Sheet

Ferric Chloride Anhydrous Specifications

Ferric Chloride Hexahydrate Specifications

Ferric Chloride Anhydrous Manufacturers

Ferric Chloride Anhydrous SDS, MSDS Sheet, Material Safety Data Sheet

1. Product Identification

Synonyms: Iron(III) chloride
CAS No.: 7705-08-0
EINECS: EC Number: 231-729-4
Molecular Weight: 162.2
Chemical Formula: FeCl3

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Corrosive to Metals Category 1
Acute toxicity, oral Category 4
Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 1

Labeling according Regulation (EC) No 1272/2008

GHS Label Elements
Irritant
Irritant

GHS Label Elements
Corrosive
Corrosive

Signal Words: Danger

Hazard statements:
H290: May be corrosive to metals.
H302: Harmful if swallowed.
H315: Causes skin irritation.
H318: Causes serious eye damage.
H401: Toxic to aquatic life.

Precautionary statements:
P234: Keep only in original container.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P330: Rinse mouth.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+352: IF ON SKIN: Wash with soap and water.
P332+313: If skin irritation occurs: Get medical advice/attention.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P362: Take off contaminated clothing and wash before reuse.
P390: Absorb spillage to prevent material damage.
P404: Store in a closed container.
P501: Dispose of contents/container to authorized agents only.

Classification according to Regulation (EC) No 1272/2008:
Corrosive to metals (Category 1), H290
Acute toxicity, Oral (Category 4), H302
Skin irritation (Category 2), H315
Serious eye damage (Category 1), H318
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Xn: Harmful
R22: Harmful if swallowed.
R38: Irritating to skin.
R41: Risk of serious damage to eyes.

3. Composition/Information on Ingredients

Ingredient: Ferric Chloride Hexahydrate
CAS No.: 7705-08-0
EINECS: EC Number: 231-729-4

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Treat symptomatically.

5. Fire Fighting Measures

Flammability of the Product: The product is not flammable.
Products of Combustion: It forms oxides of iron and hydrochloric acid when heated to decomposition.
Fire: Non flammable.
Explosion: not known.
Fire Extinguishing Media
: Use water spray, dry chemical, foam, or carbon dioxide.
Special Information
 In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures or when moistened under fire conditions, it may produce toxic or irritating fumes.

6. Accidental Release Measures

Small Spill: Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water and swab.

7. Handling and Storage

Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation at places where dust is formed. If you feel unwell, seek medical attention.
Keep Ferric Chloride Hexahydrate in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage or contact with oxidizing material and combustible substances. Avoid moisture and store away from water sources. It is to be stored in corrosive area.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: None established. Assure it as below 2mg/m3.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: Ferric Chloride Hexahydrate is Powder.
Odor: NA
Solubility: Soluble.
pH: Not available.
Density: 2.8 gm/cc
Molecular Weight: 162.2
Chemical Formula: FeCl3
% Volatile by volume @ 21C (70F): 0
Boiling Point: NA
Melting Point: Melting point/range: 304°C

10. Stability and Reactivity

Stability: Ferric chloride hexahydrate is stable under ordinary conditions of use and storage. It must be kept in air tight containers.
Hazardous Decomposition Products: It produces oxides of iron along with hydrochloric acid when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, Forms shock-sensitive mixtures with certain other materials., Sodium/sodium oxides, Potassium. Exothermic in contact with water.
Conditions to Avoid: Moisture, Heat, Sun light, Incompatibles.

11. Toxicological Information

Toxicity to Animals:
LD50 Oral - Mouse - 1.300 mg/kg
LD50 Dermal - Rabbit - > 2.000 mg/kg
Carcinogenic Effects: Not a reported carcinogen by IARC NTP ACGIH OSHA.

12. Ecological Information

Toxicity to fish: LC50 - Pimephales promelas (fathead minnow) - 21,84 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia magna (Water flea) - 9,6 mg/l - 48 h
LC50 - Pimephales promelas (fathead minnow): 21.84 mg/l - 96 h
EC50 - Daphnia magna (Water flea): 9.6 mg/l - 48 h
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Do not allow material to contaminate ground water system.
Biodegradability: Not available.
BOD5 and COD: Not available.
Environmental Fate: No information found.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Ferric chloride Hexahydrate in accordance with federal, state and local requirements.

14. Transport Information

DOT (US):
UN number: 1773 Class: 8 Packing group: III
Proper shipping name: Ferric chloride, anhydrous
Reportable Quantity (RQ): 1000 lbs
Poison Inhalation Hazard: No
IMDG:
UN number: 1773 Class: 8 Packing group: III EMS-No: F-A, S-B
Proper shipping name: FERRIC CHLORIDE, ANHYDROUS
Marine pollutant: yes
IATA:
UN number: 1773 Class: 8 Packing group: III
Proper shipping name: Ferric chloride, anhydrous

15. Regulatory Information

USA:
SARA 302 Components
: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: Acute Health Hazard
Massachusetts Right To Know Components: Iron trichloride, CAS-No. 7705-08-0
Pennsylvania Right To Know Components: Iron trichloride, CAS-No. 7705-08-0
New Jersey Right To Know Components: Iron trichloride, CAS-No. 7705-08-0
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
HMIS (Perceived): Health hazard: 2, Flammability: 0, Physical Hazard 0
NFPA (Perceived): Health hazard: 2, Fire Hazard: 0, Reactivity Hazard: 0

16. Other Information

EINECS EC Number: 231-729-4
Xn = Harmful
R22 = Harmful if swallowed.
R38 = Irritating to skin.
R41 = Risk of serious damage to eyes.
H290 = May be corrosive to metals.
H302 = Harmful if swallowed.
H315 = Causes skin irritation.
H318 = Causes serious eye damage.
H401 = Toxic to aquatic life.

Disclaimer:
*******************************************
Our company provides this Ferric chloride hexahydrate MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This Ferric chloride hexahydrate SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
*******************************************

Anmol Chemicals
2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

ISO 9000

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Vietnam, etc.

Copyright and Usual Disclaimer is Applicable